š Free Worldwide Shipping on All Orders!Shop Now
Hempel high Protect Epoxy Undercoat
Hempel High Protect II is a 2-part component, formerly known as Gel Protect, is a 2 part solvent free high build epoxy system for the protection against and treatment of osmosis. High Protect is easy to apply, with a long overcoating window and good tolerance to environmental conditions. Drying to a very high film thickness, it can be used as a substitute for light primer when solvent emissions are a consideration. Suitable for use above and below the waterline.
For use as a primer below the waterline on boats made of glass fibre or steel
Prevention and repair of osmosis blistering in the glass fibre both above and below the waterline
Available in 750ml, 2.5l
Available in Cream & Grey
Coverage 6.6mĀ²/ltr
Mix Ratio: 3:2
Thinners (for clean-up of tools) use No.5
Do not thin
Preparation and Applications
Ensure hull is suitably prepared and all surfaces are clean, oil free and dry
Stir all products well before use
If overcoating times are exceeded, abrade the surface and wash off with fresh water
To ensure maximum pot life, empty mixed contents promptly in to the paint tray
Only mix the amount of material that can be applied within the pot life time
For osmosis protection Fill and fair as necessary with Epoxy Filler
Then apply 2 coats of High Protect For osmosis treatment Apply a primer coat of High Protect
Fill and fair as necessary with Epoxy Filler
Apply further coats of High Protect as necessary to recommended film thickness of 3 to 4 coats
Overcoat with Underwater Primer, followed by 2 coats of Antifouling Mixing
Mix ratio is 3 parts base to 2 parts curing agent by volume. Add curing agent to base and stir well. For best results allow mixed paint to rest for several minutes before use to allow air bubbles to escape. Do not thin.
Application
Roller, laying off with brush if necessary Tool cleaner use Thinners No.5 Coverage of 5m squared per 1L at 200 microns Minimum application temperature of 5 degrees C or 40 degrees F Pot life of 1 hour
For more detailed information on painting and additional product information please telephone Hempel on 01489 864440.
For use as a primer below the waterline on boats made of glass fibre or steel
Prevention and repair of osmosis blistering in the glass fibre both above and below the waterline
Available in 750ml, 2.5l
Available in Cream & Grey
Coverage 6.6mĀ²/ltr
Mix Ratio: 3:2
Thinners (for clean-up of tools) use No.5
Do not thin
Preparation and Applications
Ensure hull is suitably prepared and all surfaces are clean, oil free and dry
Stir all products well before use
If overcoating times are exceeded, abrade the surface and wash off with fresh water
To ensure maximum pot life, empty mixed contents promptly in to the paint tray
Only mix the amount of material that can be applied within the pot life time
For osmosis protection Fill and fair as necessary with Epoxy Filler
Then apply 2 coats of High Protect For osmosis treatment Apply a primer coat of High Protect
Fill and fair as necessary with Epoxy Filler
Apply further coats of High Protect as necessary to recommended film thickness of 3 to 4 coats
Overcoat with Underwater Primer, followed by 2 coats of Antifouling Mixing
Mix ratio is 3 parts base to 2 parts curing agent by volume. Add curing agent to base and stir well. For best results allow mixed paint to rest for several minutes before use to allow air bubbles to escape. Do not thin.
Application
Roller, laying off with brush if necessary Tool cleaner use Thinners No.5 Coverage of 5m squared per 1L at 200 microns Minimum application temperature of 5 degrees C or 40 degrees F Pot life of 1 hour
For more detailed information on painting and additional product information please telephone Hempel on 01489 864440.
Select Size
Select Color
From $15.13
Original: $43.23
-65%Hempel high Protect Epoxy Undercoatā
$43.23
$15.13Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Hempel High Protect II is a 2-part component, formerly known as Gel Protect, is a 2 part solvent free high build epoxy system for the protection against and treatment of osmosis. High Protect is easy to apply, with a long overcoating window and good tolerance to environmental conditions. Drying to a very high film thickness, it can be used as a substitute for light primer when solvent emissions are a consideration. Suitable for use above and below the waterline.
For use as a primer below the waterline on boats made of glass fibre or steel
Prevention and repair of osmosis blistering in the glass fibre both above and below the waterline
Available in 750ml, 2.5l
Available in Cream & Grey
Coverage 6.6mĀ²/ltr
Mix Ratio: 3:2
Thinners (for clean-up of tools) use No.5
Do not thin
Preparation and Applications
Ensure hull is suitably prepared and all surfaces are clean, oil free and dry
Stir all products well before use
If overcoating times are exceeded, abrade the surface and wash off with fresh water
To ensure maximum pot life, empty mixed contents promptly in to the paint tray
Only mix the amount of material that can be applied within the pot life time
For osmosis protection Fill and fair as necessary with Epoxy Filler
Then apply 2 coats of High Protect For osmosis treatment Apply a primer coat of High Protect
Fill and fair as necessary with Epoxy Filler
Apply further coats of High Protect as necessary to recommended film thickness of 3 to 4 coats
Overcoat with Underwater Primer, followed by 2 coats of Antifouling Mixing
Mix ratio is 3 parts base to 2 parts curing agent by volume. Add curing agent to base and stir well. For best results allow mixed paint to rest for several minutes before use to allow air bubbles to escape. Do not thin.
Application
Roller, laying off with brush if necessary Tool cleaner use Thinners No.5 Coverage of 5m squared per 1L at 200 microns Minimum application temperature of 5 degrees C or 40 degrees F Pot life of 1 hour
For more detailed information on painting and additional product information please telephone Hempel on 01489 864440.
For use as a primer below the waterline on boats made of glass fibre or steel
Prevention and repair of osmosis blistering in the glass fibre both above and below the waterline
Available in 750ml, 2.5l
Available in Cream & Grey
Coverage 6.6mĀ²/ltr
Mix Ratio: 3:2
Thinners (for clean-up of tools) use No.5
Do not thin
Preparation and Applications
Ensure hull is suitably prepared and all surfaces are clean, oil free and dry
Stir all products well before use
If overcoating times are exceeded, abrade the surface and wash off with fresh water
To ensure maximum pot life, empty mixed contents promptly in to the paint tray
Only mix the amount of material that can be applied within the pot life time
For osmosis protection Fill and fair as necessary with Epoxy Filler
Then apply 2 coats of High Protect For osmosis treatment Apply a primer coat of High Protect
Fill and fair as necessary with Epoxy Filler
Apply further coats of High Protect as necessary to recommended film thickness of 3 to 4 coats
Overcoat with Underwater Primer, followed by 2 coats of Antifouling Mixing
Mix ratio is 3 parts base to 2 parts curing agent by volume. Add curing agent to base and stir well. For best results allow mixed paint to rest for several minutes before use to allow air bubbles to escape. Do not thin.
Application
Roller, laying off with brush if necessary Tool cleaner use Thinners No.5 Coverage of 5m squared per 1L at 200 microns Minimum application temperature of 5 degrees C or 40 degrees F Pot life of 1 hour
For more detailed information on painting and additional product information please telephone Hempel on 01489 864440.
