Rustins Plastic Wood

Rustins Plastic Wood 
Quick drying wood filler. Intended Use For the repair of mouldings and broken edges, filling cracks and holes. Can be cut, filed,  drilled and planed. When dry will take screws and nails. Can be used on wood, metal and stone.

Available; Natural, Teak, Mahogany, White.

Free applicator with tube

Preparation
The surface must be cleaned and dry and for best adhesion slightly roughened.
Application
Apply in thin layers with applicator or filling knife. When hard apply further layers, making  sure that the final application has is higher than the surrounding area. When plastic wood  has hardened, sand smooth.

• Coats: As many layers as required. Drying Time 4-6 hours, deep holes may take longer.
• Re-coating Time: Do not re-apply until first application is dry.
• Application Temp: Ideally 15-25°C.  Do not use below 5°C, or in conditions of high humidity.
• Compatibility: Can be painted varnished or stained. Please be aware that when stained, colour may vary  from surrounding wood.
• Settlement: Mix thoroughly if there are signs of separation.
• Shelf-life/Storage: The shelf life of the product in an airtight container is indefinite. It is preferable to store the  product in a cool place. It is important to replace the lid and ensure an airtight seal.
• Hazards: Highly Flammable. Keep out of reach of children.  Use only in well ventilated areas.  Keep  away from sources of ignition – no smoking.  Avoid contact with skin and eyes.  After contact  with skin, wash immediately with plenty of soap and water or a proprietary skin cleanser.  Do  not use solvent or White Spirit. Health and Safety Sheet available on Rustins Web Site. Clean-Up Clean tools with Cellulose